Spillrite's Industrial wet dry vacuum Reverse Drum Lid vacuum is an all round solution for wet and dry industrial waste. This air powered vacuum can vacuum both wet and dry industrial waste and also reverse fluid pump and reverse filter clean.

Spillrite 2024 buy

RDLV SH22 text

Wet dry industrial vacuum operation controls.

  • Wet fluid vacuum
  • Dry waste vacuum
  • Reverse fluid pump out
  • Reverse filter clean

RDLV SH22 Operation Industrial wet dry vacuum - operation controls

 

CAUTION

Be sure both control valves are in off

position before connecting air supply

to valve (12). Lock lid to drum (4)

To Start - connect air supply to

universal coupling (12).

Screw Handle (1) - unwind up to

fully open position for vacuum only

operation.

Float Valves (8) - to be attached

to black threaded tubes for wet

operation.

WET OPERATION - only

• Close Reverse valve (6).

• Turn valve (5) to start vacuum

• Float valves will rise as fluid rises in

drum shutting off vacuum even if air

supply is still active.

Reverse OPERATION - only

• Install drop pipe (10).

• Connect vac/pump hose to port (3).

• Close Vacuum valve (5).

• Turn valve (6) to start reverse pump

out.

Dry OPERATION - only

• Connect dry filter cartridge (11) to lid

using springs (7).

Vacuum - Screw Handle up - activate

control 5.

Reverse Filter Clean - Screw Handle

down - activate control 6.